Unsurfaced Roads



Two construction vehicles and construction workers constructing a unsurfaced road using Tensar's geogrids

Unsurfaced Roads

No road surface does not mean no design

Unsurfaced roads may be permanent or temporary, for example haul and access roads are normally unsurfaced and intended for a relatively short life. But a much larger network of unsurfaced permanent roads exists.  In many parts of the world, including many highly developed countries, most connecting roads and farm to market roads are unsurfaced. They comprise one or more layers of unbound material to protect the subgrade, distribute wheel loads, and provide a suitable surface for vehicles to travel safely.   

All roads, temporary and permanent, should be designed to provide the required service life, based on traffic load and ride quality, with the most economic use of materials and energy. Economical design should also deliver minimum carbon emissions and lowest whole life cost. 

Image of Protecting the subgrade during construction

Protecting the subgrade during construction

During construction, subgrade soils need protecting from rutting and deformation that lead can to a weakening of the soil. In addition, a smooth formation with crossfall needs to be maintained to allow for drainage or water infiltrating from the surface. Ruts in the formation hold water within the road structure that leads to softening of the subgrade and premature failure of the road.

Post construction, the subgrade must be protected from high traffic loading that can lead to subgrade deformation and surface rutting making the road unserviceable.

Image of Getting more for less

Getting more for less.

Strengthening the unbound layers will reduce stress on the subgrade enabling a reduction in road thickness without loss of performance. The strengthening can be achieved quite simply, by mechanically stabilising the unbound layers using Tensar geogrids.

Image of Mechanical Stabilisation of the unbound layers

Mechanical Stabilisation of the unbound layers

Tensar geogrids are designed to interlock with and confine the aggregate, and create a mechanically stabilised layer (MSL) that controls particle movements both vertically and laterally. The MSL evenly distributes the load - reducing subgrade stress - increases bearing capacity, and ensures longer-term stability and performance.  Reductions of up to 50% in thickness are possible while still maintaining the design service life.

Image of Less material, less carbon - less cost

Less material, less carbon - less cost.

Reducing the thickness of the unbound layers delivers direct savings in the cost of imported materials with the knock on benefits or reduced transportation and energy costs, lower carbon emissions and quicker construction.

Tensar-Plus-Final-Logo-White.png

Design with confidence, from anywhere.

  • Design & evaluate pavement and gravel sections
  • Easily compare alternative materials
  • Determine initial and lifecycle cost savings, time savings, and sustainability metrics
  • Create high-level summaries of the design alternatives for project stakeholders
  • Share features that aid collaboration

Learn More

Start Designing Now

Stacked Image 0